Ford Meter Box

40 Series Resetters

Correcting low settings with Ford’s 40 Series Resetters is quick and easy. The meter is removed, the Resetter bar connected in the position formerly occupied by the meter, and the meter reset in the raised position. No new pipe joints are necessary. The reset meter is cleaner, easier to read, and much simpler to change. When the old service valve is in poor condition or poor location, the Resetter with one or two valves provides convenient control, putting the valve or valves at the most accessible location. An outlet valve prevents draining the customer’s service when the meter is removed. Resetters, either plain or valve type, are inexpensive when compared to any other means of obtaining these results. The brass bar of the Resetter is the same length and has the same threads as the meter to be reset. Gaskets are furnished for connecting the bar between the old meter couplings.

The Ford 40 Series Resetter is available for 5/8″, 5/8″x3/4″, 3/4″, and 1″ meters. The Resetter is available with a variety of inlet valves (key valve, ball valve, or none) and outlet valves (compression, single check, cascading dual check, cartridge dual check, or none) and heights from 7″-24″.

The 40 Series Resetter is also available for flanged 1-1/2″ & 2″ meters; options included flanged angle key or ball valve inlets; flanged angle key, ball, check, or dual check valve outlets; and with or without by-pass.

Request A Quote

Need Help
We are dedicated to providing fast, expert technical support. Please contact us to discuss your needs!

Support