- Solid -
state operation by NTEP stainless steel temperature compensated
strain gauge transducer
- Electronics
housed in NEMA 4x, UL approved enclosure to provide protection from
acids
- Low profile
design increases safety and ease of cylinder handling
- LED display
with easy readability to 1 pound (kilogram)
- High
accuracy of ± 0.5% of capacity
- Readout in
pounds or kilograms
- Indicator
can be remote mounted up to 200 feet (61 meters) away
- Rugged steel
construction with corrosion resistant finish
- All moving
parts stainless steel construction
- Measures
weight of liquefied chlorine, sulfur dioxide, ammonia, hydrogen
chloride, carbon dioxide or other liquid or liquefied gas
- Self-locking
knob for adjusting tare weight
- 1 - 6 bases
can be summed together into one indicator
|
|
The Model 3001™
thru 3006™ with standard 4½ digit indicator plugs into a wall
source and operates on 120 or 240 VAC, 50/60 Hz. As the gas in each
cylinder is used, the LED display will continuously indicate the amount
of gas remaining. An adjustable, self-locking knob is provided so the
operator can pre-set the tare weight. Capacity range for platform is as
follows: Gross, 4000 lbs. (1814.4kg): Tare, 2000 lbs. (907.2 kg); and
Product, 2000 lbs. (907.2 kg).
For operation, the
scale employs a NTEP stainless steel temperature compensated strain
gauge transducer. It offers high accuracy of ± 0.5%. The Model 3001™
thru 3006™ has sturdy three-point suspension and is built ruggedly for
use in harsh environments. Construction is all steel, coated with a
tough, caution yellow, dry powder polyester plastic finish to protect it
from corrosion. Display electronics are housed in a NEMA 4x, UL approved
enclosure.
The Model 1099™
Chemical Process Controller is also available on this base, which allows
the user to combine different bases to create a customized Total
Electronic SystemSM. Please contact the factory for
literature on the Model 1099™ Chemical Process Controller.
All of our
indicators can be calibrated in pounds or kilograms. |
