|
| |
|
|
 |
Is now available at Ti-Sales Inc., for the New England and Up-State New
York Area. |
 |
| Ton Cylinder Scale
Tote Bin Scale
150 lb. Cylinder Scale
Spill
Containment Scales
Drum, Tank & Platform Scales |
| Click on a link above for detailed
information. |
| |
|
MODEL 4042™ - 4042WB™ SECONDARY SPILL
CONTAINMENT SCALE |
 |
|
|
- Patent
Pending
- Solid state
operation with temperature compensated strain gauge transducers
- Electronics
housed in a NEMA 4x, UL approved enclosure to provide protection
from chemicals
- Independent
weighing platform with digital liquid crystal display
- Standard
readability to 1 lb. (kg), 0.1 lb. (kg.)
- High
accuracy of up to ±0.1% to ±0.5%
- Readout in
pounds or kilograms
- Rugged steel
construction protected by corrosion resistant dry powder plastic
finish, with polyethylene containment platform
- Indicator
can be locally or remote mounted up to 200 ft. (61 meters) away
|
|
|
- Measures
weight of chemicals such as fluoride, sodium hypochlorite, sodium
hydroxide, sodium bisulfate, polymers, ammonia, phosphate, alum,
caustic, sodium aluminate or other liquids or powders
- Self-locking
knob for adjusting tare weight
- Output
4-20mA signal for permanent recording or transmitting - OPTIONAL
RS232 also available
- The 4½ digit
indicator also has 0-20mA and -8 to + 12 mA outputs standard. All
three outputs are selectable as scale powered or loop powered
- Four load
cell design means the load can be placed anywhere on the containment
platform and does not need to be leveled
-
Model 1099™ Chemical Process Controller
as optional indicator to create the Total Electronic SystemSM
|
|
The Model 4042™
and 4042WB™ Secondary Spill Containment Scale™ weigh only the
chemical dispensed into the water treatment system. If there is a
chemical spill, the weight is still on the scale and doesn't read as
though it has been dispensed into the system. The scales have four Load
Cells that are completely sealed in PVC and Vinyl Plastic enclosures,
which means they are protected from spilled chemicals and the chemical
containers do not have to be centered, balanced or leveled. Integral
Splash, Spill and Containment scale platforms are resistant to most
water treatment chemicals such as: fluoride, sodium hypochlorite, sodium
hydroxide, sodium bisulfate, polymers, ammonia, phosphate, alum,
caustic, sodium aluminate or other liquids or powders. These patent
pending Scaletron Industries, Ltd. spill contaimnent scales have an
ultra low-profile design. The scale frame height does not exceed 1.5
inches. The low-profile design faciIitates easy on and off loading of
heavy containers. The Model 4042™ spill containment scale contains
moderate spills, while the Model 4042WB™ (with bladder) has the
additional benefit of a special rollout bladder to hold the contents of
the container being weighed if spilled or leaked.
Three indicators
are available for the Model 4042™ and 4042WB™ Secondary Spill
Containment Scale™. All are mounted in a NEMA 4x, UL approved
enclosures. The standard indicator is the 3½ Digit with liquid crystal
display(LCD), and standard 4-20 mA output. Display reads either 0.1
lb./kg. to 199.9 lbs./kg, or 1.0 lb./kg. for weights 200 lbs./kg. to
1500 lbs./680 kg. Optional indicators include the 4½ Digit, LED
indicator with standard active and passive 4 - 20mA output and two low
level relay contacts. This display has a resolution of 1500 lbs.(680
kg.). The Model 1099™ Chemical Process Controller is also available,
allowing the user to combine different scale bases to create a
customized Total Electronic SystemSM. Please contact the
factory for literature on the Model 1099™ Chemical Process Controller.
All of our
indicators can be calibrated in pounds or kilograms. |
|
Literature |
Operating Instructions |
|
| For
more information contact us |
| Phone 800-225-4616 |
Phone 978-443-2002 |
| Fax 978-443-7600 |
E-Mail
Customer Service |
|
| The
Supply House That Knows how To Help! |
|
|
